B1-2K Plus

1.5 kW, 1:1, Current-Type Balun

{short description of image}

RADIO WORKS'™ WEB STORE

Available at the RADIO WORKS'™ Web Store

B1-2K PLUS
1:1 Current Balun, 2 kW		 $45.95
{short description of image}

Return to Web Store Index

B1-2K

The B1-2K has been replaced by the B1-2K Plus, except during special sales.

B1-2K Plus

Balun Type

 Current Current

Ratio

 1:1 1:1

Operating Bandwidth

80 - 10 m

80 - 6 m

Power Loss, dB

Nil

Nil

Saturation Resistant

Yes

Yes

Internal Transmission Line Z

50 Ohms

50 Ohms

Core Type

Ferrite

HF/VHF Ferrite

Power Rating @ 3.5 MHz

1.5 kW if SWR < 3:1 *

1.5 kW if SWR < 3:1 *

Output Balance

Excellent

Excellent

Load Variation Tolerance

Excellent

Excellent

Input connector

SO-239

SO-239

Output Connector

Wire

Wire

Size

2.3" x 8"

2.3" x 8"
* Important: Antennas are not rated for AM, RTTY or other high duty-cycle modes. The power rating is for normal SSB and CW duty-cycles only.

Exception: At transceiver output levels, all antennas rated for 1500 watt service may be used on PSK-31 and similar modes without sacrificing low IMD specifications.

Applications:

Dipoles, trap dipoles, Inverted-V, etc. Any application requiring a 50 or 75 ohm balun.

The B1-2K follows the same tradition of the uncompromising performance established by the incomparable C1 and B4 baluns. The B1-2K is built into a conventional case with eyebolts. It is here the similarity with other products ends. The B1-2K is a high power balun. There cores are over twice the size of other manufacturer's baluns. Only the RADIO WORKS' design brings the wires from the balun's windings directly outside the case so you may solder them directly to the antenna wire.

With the introduction of newly developed ferrites operating in both the HF and VHF regions, it is now possible, with new winding techniques, to build a balun which covers an additional octave of bandwidth. The result is the B1-2K Plus which efficiently covers 80 - 6 meters with excellent performance.

Direct connection between the balun's windings and the antenna's elements means there is no chance of an intermittent connections.

Eye-bolts are stainless-steel and the entire assembly is built for long life.

The B1-2K Balun is perfect for any wire antenna with 50 ohm coaxial feed.

Back to Home Page
Back to Web Store Index
To Balun Index
To Balun Selection Chart
To Balun Reference and General Information
To top of page
{short description of image}
{short description of image}
{short description of image}
{short description of image}
{short description of image}
{short description of image}